New Guide FLIGHT Simulator

Take Off
The airport ground radio contact and asked to be allowed to fly 'cleared for takeoff'.
The throttle is fully charged for the plane to quickly reach the flying speed.
Adjust the steering wheel so the plane is not too swooping.
Raise the wheels of the plane 'landing gear'.
Set the autopilot so that the aircraft matches the predetermined flight route. The autopilot sign is already on, the indicator light is on.

 

Landing
Navigate the plane as per landing lane.
Enter the ILS frequency in NAV1 which stand by then just activated.
Wait until Morse code sounds, it's a sign that the frequency of ILS is recognized by the airport.
Once the morse password is activated the autopilot approach. Then the autopilot for heading and Altitude will die because the heading and Altitude are controlled by ILS. So live autopilot speed is still active.
Set the speed so that it reaches the maximum speed for the landing.
Do not forget to set the flaps so that the plane does not stall.
Lower the maximum landing gear set of autobrakes.
When the rear wheel has touched the ground, turn off the autopilot and set the throttle to idle then set the reverse throttle.

How to know the frequency and heading of ILS
Go to the map menu.
Zoom in the airport to see the boxes.
Double click on airport will show information of airport facilities.